Viewing Node Resources - SolarWinds User Device Tracker UDT Quick Start Manual

13. Click Validate SNMP after entering all required credentials to confirm your
SNMP settings.
14. If you want to change the default polling settings for your promoted
node, edit the Node Status Polling or Collect Statistics Every values in
the Polling area, as appropriate.
Note: The Node Status Polling value refers to the period
of time, in seconds, between the node status checks Orion
performs on the promoted node. The Collect Statistics
Every value refers to the period of time between updates
Orion makes to displayed statistics for the promoted node.
15. If you have defined any custom properties for monitored nodes,
provide appropriate values for the promoted node in the Custom
Properties.
16. Click Submit when you have completed properties configuration for your
promoted node.
17. If you have successfully added the node, click OK on the dialog.

Viewing Node Resources

The List Resources feature of the Orion Web Console Node Management utility
allows you to immediately see all monitored interfaces, volumes, and interface
charts on a selected node, as shown in the following procedure.
To view a list of all resources present on a node:
1. Log in to the Orion Web Console as an administrator.
2. Click Settings in the top right of the web console.
3. Click Manage Nodes in the Node and Group Management grouping of the
Orion Website Administration page.
4. Locate the node to view using either of the following methods:
Use the search tool above the node list to search your Orion
l
database for the node you want to view.
Select an appropriate Group by criteria, and then click the
l
appropriate group including the node to view.
Viewing Node Resources
95