Enabling Iis On Windows 7 - SolarWinds User Device Tracker UDT Quick Start Manual

Chapter 2: Installing SolarWinds User Device Tracker
6. If you are prompted to add features required for Web Server (IIS), click
Add Required Features.
7. Click Next on the Select Server Roles window.
8. Click Next on the Web Server (IIS) window.
9. Confirm that Common HTTP Features > Static Content is installed.
10. Check Application Development > ASP.NET.
11. Click Add Required Role Services.
12. Check both Security > Windows Authentication and Security > Basic
Authentication.
13. Check Management Tools > IIS 6 Management Compatibility.
14. Click Next on the Select Role Services window.
15. Click Install on the Confirm Installation Selections window.
16. Click Close on the Installation Results window.
17. If you are currently enabling IIS as part of an SolarWinds UDT
installation, restart the SolarWinds UDT installer.

Enabling IIS on Windows 7

SolarWinds only supports evaluations of SolarWinds UDT version 2.0 and higher
on Windows 7. These versions of SolarWinds UDT install and enable IIS
automatically.
The following manual procedure is provided in case problems occur with the
automatic IIS installation for Windows 7.
To enable IIS on Windows 7:
1. Click Start and then click Control Panel.
2. In Control Panel, click Programs and Features and then click Turn
Windows features on or off.
3. In the Windows Features dialog box, expand Internet Information
Services.
4. Expand the category for Web Management Tools and check IIS 6
Management Compatibility. (To do this, you must expand IIS 6
Management Compatibility and then check all of the sub-options
23