SolarWinds User Device Tracker UDT Quick Start Manual page 36

If you want to import any newly enabled devices matching a
l
defined discovery profile, select a currently defined discovery, and
then click Import New Results.
If you want to delete an existing discovery profile, select a
l
currently defined discovery and then click Delete.
4. If the devices on your network do not require community strings
other than the default strings public and private provided by
SolarWinds UDT, click Next on the SNMP Credentials view.
5. If any of your network devices require community strings other than
public and private or if you want to use an SNMPv3 credential,
complete the following steps to add the required SNMP credential.
Note: Repeat the following procedure for each new
community string. To speed up discovery, highlight the
most commonly used community strings on your network,
and then use the arrows to move them to the top of the list.
a. Click Add New Credential, and then select the SNMP
Version of your new credential.
b. If you are adding an SNMPv1 or SNMPv2c
credential, provide the new SNMP Community String.
c. If you are adding an SNMPv3 credential, provide the
following information for the new credential:
User Name, Context, and Authentication Method
l
Authentication Password/Key,
l
Privacy/Encryption Method and Password/Key, if
required.
d. Click Add.
6. Click Next on the SNMP Credentials view.
7. If you want to discover any VMware VCenter or ESX Servers on your
network, confirm that Poll for VMware is checked, and then complete the
following steps to add or edit required VMware credentials.
Adding Multiple Devices (Network Sonar Discovery)
36