Managing Group Members; Deleting Groups; Managing The Display Of Group Status - SolarWinds User Device Tracker UDT Quick Start Manual

Chapter 12: Managing Groups and Dependencies
Advanced, select a Status rollup mode, and then provide a Refresh
frequency.
8. Click Submit.

Managing Group Members

The following procedure manages the objects included within a defined group.
To add and remove the objects of an existing group:
1. Click Start > All Programs > SolarWinds Orion > Orion Web Console.
2. Click Settings in the top right of the web console, and then click Manage
Groups in the Node and Group Management grouping of the Orion
Website Administration page.
3. Check the group you want to edit, and then click Add and Remove
Objects.

Deleting Groups

Deleting an existing dependency is a straightforward process, as shown in the
following procedure.
To delete a group:
1. Click Start > All Programs > SolarWinds Orion > Orion Web Console.
2. Click Settings in the top right of the web console, and then click Manage
Groups in the Node and Group Management grouping of the Orion
Website Administration page.
3. Check the group you want to delete, and then click Delete.

Managing the Display of Group Status

The status of any particular group is determined by the status of the members of
the group. There are three methods for determining the status displayed for a
selected group of monitored objects:
Show Best Status is most useful for displaying groups that are defined
l
as collections of redundant or backup devices. The following table
110