Snmp Requirements For Monitored Devices; Enabling Microsoft Internet Information Services (Iis); Enabling Iis On Windows Server 2003 And Windows Xp - SolarWinds User Device Tracker UDT Quick Start Manual

Chapter 2: Installing SolarWinds User Device Tracker
about configuring additional pollers, see the SolarWinds Orion User Device
Tracker Administrator Guide.

SNMP Requirements for Monitored Devices

SolarWinds UDT can monitor the performance of any SNMPv1-, SNMPv2c-, or
SNMPv3-enabled device on your network. Consult your device documentation or
a technical representative of your device manufacturer to acquire specific
instructions for configuring SNMP on your device.
Notes:
To properly monitor devices on your network, you must enable SNMP on all
l
devices that are capable of SNMP communications
If SNMPv2c is enabled on a device you want SolarWinds UDT to monitor, by
l
default, SolarWinds UDT will attempt to use SNMPv2c to poll the device for
performance information. If you only want SolarWinds UDT to poll using
SNMPv1, you must disable SNMPv2c on the device to be polled.
Enabling Microsoft Internet Information Services
(IIS)
To host the Orion Web Console, Microsoft Internet Information Services (IIS) must
be installed and enabled on your SolarWinds UDT server. Windows Server 2003
and Windows XP require IIS version 6; Windows Server 2008 R2 and Windows
Vista require IIS version 7, as detailed in the following sections:

Enabling IIS on Windows Server 2003 and Windows XP

The following procedure enables IIS on Windows Server 2003 and XP.
To enable IIS on Windows Server 2003 and Windows XP:
1. Click Start > Control Panel > Add or Remove Programs.
2. Click Add/Remove Windows Components.
3. Select Application Server and confirm that it is checked.
4. Click Details.
5. Select Internet Information Services (IIS) and confirm that it is checked.
6. Click Details.
21