Using The Network Sonar Results Wizard - SolarWinds User Device Tracker UDT Quick Start Manual

Note: Because some devices may serve as both routers and switches, the total
number of Nodes Discovered may be less than the sum of reported Routers
Discovered plus reported Switches Discovered.
After the Network Sonar Discovery Wizard completes the node discovery and
imports results, if you click FINISH, you are taken directly to Discovery Central.

Using the Network Sonar Results Wizard

The Network Sonar Discovery Results Wizard directs you through the selection of
network devices for monitoring, and it opens whenever discovery results are
requested, either when the Network Sonar Discovery Wizard completes or when
either Import All Results or Import New Results is clicked for a selected
discovery.
The following steps detail the selection of discovered objects for monitoring in
SolarWinds UDT.
To select the results of a network discovery for monitoring in SolarWinds UDT:
1. On the Device Types to Import page, check the device types you want
SolarWinds UDT to monitor, and then click Next.
Note: If you are not sure you want to monitor a specific
device type, check the device type in question. If, later, you
do not want to monitor a selected device, simply delete the
device using Web Node Management.
2. If you are discovering devices for an Orion NPM installation, check the
interface types you want SolarWinds UDT to monitor on the Interface
Types to Import page, and then click Next.
Note: If you are not sure you want to monitor a specific
interface type, check the interface type in question. If, later,
you do not want to monitor a selected interface, delete it
using Web Node Management.
3. On the Volume Types to Import page, check the volume types you want
SolarWinds UDT to monitor, and then click Next.
Note: If you are not sure you want to monitor a specific
Using the Network Sonar Results Wizard
42