Wlan; Connecting By Wlan - Hughes 9350 User Manual

Broadband satellite terminal and wlan access point

Hide thumbs Also See for 9350:

Table of Contents

WLAN

If you have not previously used the terminal's WLAN interface, it has to be enabled from the web

MMI, with your computer connected to the terminal using the Ethernet interface.

Wireless LAN interface enabled/disabled: The default is disabled.

•

Network (SSID) name: The default is "BGAN" but you can change it to whatever you want.

Region: Select the region that best applies to your geographical location. Example: X10-FCC (1-

•

11) is used in the USA and channels 1-11 are authorized.

Channel number: This controls the radio channel number (1-14) used by the access point.

•

Channels 1-11 are used in the USA. Depending on the country, only certain subsets of these

channels may be used (3 options: France, Spain or Rest of the World). Channel 11 is common to

almost all countries, so it is used as the default.

Hughes 9350 BGAN Terminal User Guide

Table of Contents

1038495