Table of Contents
Advertisement
Refer to the documentation supplied with your computer for details.
C
USB
ONNECTING BY
To connect the BGAN terminal to the computer using the USB port:
1. Connect a USB cable to your computer's USB port, and insert the other end of the connector
into the 9350 terminal's USB port.
When plugging in the USB cable for the first time, you will see Windows installing a
new driver for the device.
Note
If you install LaunchPad, the USB driver for the terminal will also be installed. When you plug in
the USB cable into your computer for the first time, your computer will detect that new USB
Hardware has been connected. You should then follow the computer's instruction to install
the Hughes USB LAN LINK driver software (for computers using the Windows operating system,
the installation is carried out using a Found New Hardware Wizard). Your computer will then
use this driver to connect to the terminal.
If you do not install LaunchPad, USB drivers are available from:
or
www.bgan.hughes.com
C
E
ONNECTING BY
THERNET
To connect the BGAN terminal to the computer using Ethernet:
1. Connect an Ethernet cable to your computer's Ethernet port, and insert the other end of the
connector into the 9350 terminal's Ethernet port.
C
ISDN
ONNECTING BY
1. Connect an ISDN cable to your computer's or phone's ISDN port, and insert the other end of
the connector into the Terminal's ISDN port.
C
WLAN
ONNECTING BY
If you have not previously used the terminal's WLAN interface, it has to be enabled from the
internal web MMI or LaunchPad with your computer connected to the terminal using either the
USB or Ethernet interface.
As you are configuring the WLAN, you can enable the Wireless Encryption Protocol (WEP), MAC
address filtering, no broadcast SSID features for added security.
Once the WLAN is turned ON and configured, any device with a WLAN interface can detect the
terminal's WLAN SSID, and connect to it automatically.
Note: If WEP is enabled, you must provide other WLAN users with the proper WEP key in order for
them to connect to the terminal.
Hughes 9350 BGAN Terminal User Guide
www.inmarsat.com/support
7
Advertisement
Table of Contents
