Table of Contents
Advertisement
To activate a PDP context, perform the following instructions:
Do not modify the CID field unless you need to setup a specific ID for one of your devices.
Leaving it blank will allow the software to automatically choose the next CID that is available.
Leave the IP address field unchanged unless you need to setup a connection for another TE.
The APN is read from the USIM card and is usually not changed unless you have more than one
APN provisioned on the USIM card.
Next, select the QoS that is needed by selecting it from the drop down list.
If your Service Provider requires a UN and PW, enter it in the Username and Password boxes, then
click on "Apply".
The new connection will show up in the table above (See screen shot below for example).
Background Context activated for 192.168.128.101
16
Hughes 9350 BGAN Terminal User Guide
Advertisement
Table of Contents
