Security - Siemens CF62 User Manual

of CF62 Leopard us-en, A31008-H6050-A40-1-4A19 (24.02.2004, 16:32)
left page (82)
82 Setup

Security

KmK
§Menu§
K
Select function
The phone and SIM card are protected
against misuse by several security
codes.
Babysitter
(Phone-code protected)
Only one phone number can be
dialed. To do this, hold down the
right soft key (page 30).
Only
‚
(PIN2 protected)
Dialing options are limited to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialing.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
Last 10 only
(Phone-code protected)
Only phone numbers from the call
list of "dialed numbers" (page 45)
can be dialed. This list can be filled
with phone numbers specifically for
this purpose.
First delete the call list, then create
"new entries" by dialing phone num-
bers and canceling before the con-
nection is established.
Security
b
b
Codes
PIN control, Change PIN,
Change phonecode, (page 22).
This SIM only
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known, the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Barring
Barring restricts the use of your SIM
card (this is not supported by all ser-
vice providers). You need a 4-digit
password, which your service pro-
vider will give you. You may need to
be registered separately for each bar-
ring.
All outgoing
All outgoing calls except emergency
numbers are barred.
Outgo internat
(International outgoing)
Only national calls can be made.
Change PIN2,
b
b