Calling; Dialing With Number Keys; End Call; Set Volume - Siemens CF62 User Manual

of CF62 Leopard us-en, A31008-H6050-A40-1-4A19 (24.02.2004, 16:32)
left page (25)

Calling

Dialing with number keys

Open the clamshell to access the
keypad.
The phone must be switched on
(standby mode).
J
A

End call

B
Enter number (always
with area code/interna-
tional dialing code).
A short press clears
§Clear§
the last digit, a long press
clears the entire phone
number.
Press the Call key. The dis-
played phone number is
dialed.
Press the End key briefly.
Press this key even if the
person on the other end
of the line has hung up
first.

Set volume

G
Use the top of the naviga-
tion key to start adjusting
the volume. Then press
top/bottom to adjust the
volume as required
(only possible during a
conversation).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.

Redial

To redial the phone number last
called:
A
Press the Call key twice.
To redial other numbers that were
dialed previously:
A
Press the Call key once.
I
Pick out the required
phone number from the
A
list, then to dial ...
Press ...
Calling 25