Brocade Communications Systems FastIron X Series Software Update page 66

show command output differences between 07.4.00 and 08.0.xx
Brocade#show ip pim
all-vrf
anycast-rp
bsr
counter
dense
flowcache
group
interface
mcache
neighbor
nsr
optimization
prune
resource
rp-candidate
rp-hash
rp-map
mappings
rp-set
rpf
sparse
traffic
vrf
show ip Brocade#show ip pim flowcache 226.1.1.1
pim A.B.C.D
flowcache |
1.2.3.4 ? <cr>
show ip Brocade#show ip pim prune
pim prune
Total Prune entries: 0
show ip Brocade#show ip pim bsr
pim bsr
PIMv2 Bootstrap information for Vrf Instance : default-vrf
------------------------------------------------------------------
This system is a Candidate BSR
BSR address: 54.0.0.54. Hash Mask Length 4. Priority 20.
Configuration:
Candidate loopback 1 (Address 25.0.0.25). Hash Mask Length 4.
Priority 20.
Next Candidate-RP-advertisment in 00:00:20
RP: 25.0.0.25
group prefixes:
224.0.0.0 / 4
Candidate-RP-advertisement period: 60
FastIron Ethernet Switch Software Upgrade Guide
53-1003632-02
Show all VRF
PIM Anycast RP info
Bootstrap router
PIM internal counters
Dense-mode settings
Active PIM flow
IP multicast group and its associated information
PIM interface
PIM multicast cache
PIM neighbor states
Multicast NSR status
PIM Optimization
Active prunes for PIM operations
PIM resources
Candidate rendezvous point (RP)
Multicast group to rendezvous point (RP) hash
Active multicast group to rendezvous point (RP)
List of rendezvous point (RP) candidates
Find the reverse path forwarding
Sparse-mode settings
Active multicast traffic
VRF-based PIM
Multicast flow IP group address
Output modifiers
Options such as
"all-vrf", "anycast-
rp", "nsr",
"optimization",
"vrf". And
Deprecate option
"error" have been
added.
Pipe option for
filtering is added.
Prune entry count
information is
added.
VRF category, etc.
are added.