Checking The Configuration; Configuring The Device As A Pppoe Server - Huawei AR530 Series Configuration Manual

Industrial switch routers
Hide thumbs Also See for AR530 Series:
Table of Contents

Advertisement

Huawei AR530&AR550 Series Industrial Switch Routers
Configuration Guide - WAN
If no-hostuniq is not specified, the PPPoE session initiated by the PPPoE client contains the
Host-Uniq field. The PPPoE client uses this field to associate an access server response with a
particular host request, which ensures strict check.
If on-demand is specified, run the dialer timer idle seconds command to set the link idle time
on the dialer interface.
Multiple PPPoE sessions can be established on an Ethernet interface. That is, an Ethernet interface can belong
to multiple dialer bundles. A dialer bundle can contain only one Ethernet interface. One dialer bundle maps one
PPPoE session. If the dialer bundle of a dialer interface already has an Ethernet interface used for PPPoE, no
interface can be added to the dialer bundle. If the dialer bundle contains other interfaces, no Ethernet interface
can be added to the dialer bundle to establish PPPoE sessions on the PPPoE client.
Step 4 Run:
quit
Return to the system view.
Step 5 Run:
ip route-static 0.0.0.0 0 { nexthop-address | interface-type interface-number }
[ preference preference ]
A default route from the local end to the PPPoE server is Configured.
----End

3.5.1.6 Checking the Configuration

Pre-configuration Tasks
The device has been configured as the PPPoE client so that hosts on the LAN connected to the
device can dial up to the Internet. A PPPoE session has been established, and you can view the
PPPoE session status.
Procedure
l
----End

3.5.2 Configuring the Device as a PPPoE Server

When the device functions as a PPPoE server, it allocates IP addresses to users and provides
various authentication modes.
Pre-configuration Tasks
Before configuring the device as a PPPoE server, complete the following task:
l
Issue 01 (2014-11-30)
NOTE
Run the display pppoe-client session { packet | summary } [ dial-bundle-number
number ] command to check the PPPoE session status and statistics.
Powering on the device
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 PPPoE Configuration
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar550 series

Table of Contents