Guardian wireless video surveillance system (60 pages)
Summary of Contents for Uniden GC43
Page 1
(Not Shown) AC adapter GC43 video camera If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products! Need Help? Get answers 24/7 at our website: www.uniden.com. If You... Contact Uniden’s... Phone Number Customer Care...
important safety instructions! this manual contains important information about this product’s operation. if you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: This equipment is NOT waterproof.
Clean only with a dry cloth. • Failure to follow the instructions in this operating manual will void the warranty. Uniden assumes no liability for damages to property or injury to persons caused by improper handling or failure to comply with these safety instructions.
contents lithium-Polymer Battery Placement Considerations ... 6 Warning ......11 Mount the stand....... 6 important safety recycling and disposal Attach the camera ....7 instructions! .......2 information ......12 Connect to power ....7 Warnings to Parents and Fcc compliance information 12 Other Users ....
The battery has charged. moUnt the cAmerA stAnd generAl gUidelines The Uniden Guardian GC43 camera not weatherproof. Also, as dust, grime, and cobwebs accumulate on the camera glass, they can reflect light from the infrared LED and might lower video quality. Periodically clean the lens glass with a soft cloth.
Walls, especially brick and concrete, shorten the transmission distance. — Optimized motion detection range is 6 - 12 feet for the GC43 camera. The • farther away an object is, the less accurate the motion detection. Avoid having a direct light source in the view of the camera, including street •...
AttAch the cAmerA Slide the camera on to the stand swivel mount until it clicks in place. connect to PoWer 1. Connect one end of an AC adapter to the camera’s power pigtail and plug the other end into a 120 volt AC (standard indoor) power outlet.
PAiring cAmerAs some things to knoW ABoUt PAiring cAmerAs If a camera is already assigned to the selected channel, the receiver • overwrites that camera link with the new one. Only pair one camera at a time! The receiver links to the first camera it •...
troUBleshooting cAmerA PAiring Consult the following table for camera pairing troubleshooting suggestions: If... Try... • making sure the camera is plugged in and the green LED is on. • making sure that the camera’s antenna is swiveled the camera’s signal up in position and the receiver’s antenna is status icon shows no extended.
AdditionAl inFormAtion ProdUct sPeciFicAtions Radio Frequency Transceiver RF Frequency 2.4 GHz Modulation GFSK Spread spectrum Frequency Hopping Anti Interference Clean Channel Dynamic Select Selectable camera channel Data rate 2 Mbps 500 feet (152 meters) in an open area (line of Transmitting range sight) Image Specification...
Camera Specifications Low light sensitivity 1-8 lux Picture sensor OV7725 1/4’ Color CMOS Lens F3.6mm H:53 V:40 lithium-Polymer Battery Warning This equipment contains a rechargeable lithium-polymer battery. • Do not charge the battery in temperatures below 32° F (0° C) or higher than •...
Earth911.com to find an electronics recycling facility in your area. If you are unable to locate proper recycling facilities in your area, please return this • product to Uniden for recycling. Fcc compliance information Part 15 compliance statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the...
Move the equipment away from the receiver. • Plug the equipment into an outlet on a circuit different from that to which the • receiver is connected. Consult the dealer or an experienced radio/television technician for additional • suggestions. cAUtion! Any changes or modifications to this equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
WARRANTOR: Uniden America Corporation (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship with only the limitations or exclusions set out below.