Verifying Management Client; Verifying Management Station - Chelsio T5 Installation And User Manual

Hide thumbs Also See for T5:

Table of Contents

Chapter III. Unified Wire Manager (UM)

2. Search for Unified Wire Manager in the list of services. You should get the options to stop

and restart in the Actions menu on the left side, indicating that Management Agent is

already running.

Figure 5.1(b) – Actions available for Unified Wire Manager service

5.2.

Verifying Management Client

Execute the following query command to determine if Management Client is installed:

C:\Users Administrator>chelsio_uwcli.exe -V

The above query should confirm that Management Client is installed by displaying a similar

result:

Unified Manager client CLI version : 2.x.yy

5.3.

1. Launch Services from the Control Panel. You can also type services.msc in the Run

command. This will open the Services window.

2. Search for Unified Wire Management Station in the list of services. You should get the

options to stop,start and restart the service in the Actions menu on the left side.

Figure 5.3 – Verifying Management Station service status

Chelsio T5/T4 Unified Wire for Windows

Table of Contents

Do you have a question about the T5 and is the answer not in the manual?