Chelsio T5 Installation And User Manual page 142

Chapter III. Unified Wire Manager (UM)
FO iSCSI Session Details
The FO iSCSI Session Details module can be used to log onto targets and view details of
established iSCSI sessions. You can also logout from a target
Use the Login section to connect to a target. Adapter, (initiator) instance, Target Name,
Source (Initiator) IP, Destination (Target) IP and Destination Port are mandatory. After providing
values for these fields, click Login.
By default, no authentication mechanism is used while connecting to a target. You can however
configure CHAP for a secure iSCSI connection. One-way (target authenticates the initiator) and
Mutual (target and initiator authenticate each other) authentication methods are supported.
Figure 8.7.3 (f) - FO iSCSI Session Details module: Login
Chelsio T5/T4 Unified Wire for Windows 142