Chelsio T5 Installation And User Manual page 159

Chapter III. Unified Wire Manager (UM)
8.8.5. T3 iSCSI / T3 PXE Boot Option Rom Management (Linux)
The Chelsio T3 card may be used for PXE or iSCSI boot. This module allows managing the
boot capability. The Option ROM (PXE/iSCSI) may be installed to the card, or erased from the
card. iSCSI boot Option ROM settings can be configured for the card here. Enable the iSCSI
Option ROM only if you are planning to boot the system via iSCSI. Refer the iSCSI boot
documentation for more details about its configuration.
Figure 8.8.5 (a) - Option ROM management module for a T3 card
Chelsio T5/T4 Unified Wire for Windows 159