Flashing Option Rom - Chelsio T5 Installation And User Manual

Chapter I. Chelsio Unified Wire
4.2.

Flashing Option ROM

Unified Wire Installer will flash Option ROM onto the first Chelsio adapter
Important
present in remote node (Adapter with index 0. See
CLI to determine adapter index). Hence, ensure that you either use a non-
Chelsio adapter for corporate/private network or ensure that the Chelsio
adapter used is not installed as first on remote nodes.
Option ROM can be flashed using two methods. Both methods involve deployment of UM
components.

Deploying components and Flashing Option ROM together.

Deploying components and Flashing Option ROM separately.
Both methods mentioned above will flash option ROM only onto the first Chelsio
Note
adapter present in the remote node. If you plan to flash more adapters in the same
node or add new nodes to the cluster, they will have to be added as members to a
group and flashed using UM's CLI component. See
instructions.
Flashing option ROM on remote nodes with inbox NDIS drivers will fail. Hence,
Note
please ensure that all nodes are updated to the latest version using the Unified Wire
Installer.
4.2.1. Deploying UM components and Flashing Option ROM together
1. Run the following command to invoke the UM installer.
PS C:\Users\Administrator> .\ChelsioUwire-x.x.x.x.exe -action flashoptionrom
-config <config_file.txt>
Chelsio T5/T4 Unified Wire for Windows
Configuring using UM
Configuring using UM CLI for
29