Wds Settings - 3Jtech TS8DWRWIFIROUTER User Manual

http://www.3jtech.com.tw
http://www.pnpipcameras.com
DWR User's Guide
Current Access
Control List
Delete Selected
Delete All
Reset

3.2.4.7 WDS Settings

Wireless Distribution System uses wireless media to communicate with other APs, like the Ethernet
does. To do this, you must set these APs in the same channel and set MAC address of other AP that
you want to communicate with in the table and then enable the WDS.
NOTE: WDS / AP + WDS mode must be selected in Wireless Basic Settings if you would like to enable the
function of WDS settings.
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
It shows the registered clients that are allowed to
link to this DWR.
Click to delete the selected clients that will be
access right removed from this DWR.
Click to delete all the registered clients from the
access allowed list.
Click the Reset button to abort change and recover
the previous configuration setting.
Fig. 3-12
23