3Jtech TS8DWRWIFIROUTER User Manual page 21

http://www.3jtech.com.tw
http://www.pnpipcameras.com
DWR User's Guide
Authentication Type
Fragment Threshold Set the data packet fragmentation threshold, value
RTS Threshold
Beacon Interval
Data Rate
Preamble Type
Broadcast SSID
IAPP
802.11g Protection
WMM
RF Output Power
Turbo Mode
Apply Changes
Reset
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Item
Click to select the authentication type in Open
System, Shared Key or Auto selection.
can be written between 256 and 2346 bytes.
Set the RTS Threshold, value can be written
between 0 and 2347 bytes.
Set the Beacon Interval, value can be written
between 20 and 1024 ms.
Select the transmission data rate from the pull-down
menu. Data rate can be auto-select, 11M, 5.5M, 2M
or 1Mbps.
Click to select the Long Preamble or Short
Preamble support on the wireless data packet
transmission.
Click to enable or disable the SSID broadcast
function.
Click to enable or disable the IAPP function.
Protect 802.11b user.
Click Enabled/Disabled to init WMM feature.
To adjust transmission power level.
Click to Enable/Disable turbo mode. (Only apply to
the application of DWR to DWR).
Click the Apply Changes button to complete the
new configuration setting.
Click the Reset button to abort change and recover
the previous configuration setting.
Description
21