Table of Contents
Advertisement
http://www.3jtech.com.tw
http://www.pnpipcameras.com
DWR User's Guide
For OS of Microsoft Windows 2000, XP:
1.
Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2.
Move mouse and double-click the right button on Network and Dial-up Connections icon.
Move mouse and double-click the Local Area Connection icon. The Local Area Connection
window will appear. Click Properties button in the Local Area Connection window.
3.
Check the installed list of Network Components. If TCP/IP is not installed, click the Add
button to install it; otherwise go to step 6.
4.
Select Protocol in the Network Component Type dialog box and click Add button.
5.
Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to
install the TCP/IP protocol, it may need the Microsoft Windows CD to complete the
installation. Close and go back to Network dialog box after the TCP/IP installation.
6.
Select TCP/IP and click the Properties button on the Network dialog box.
7.
Select Specify an IP address and type in values as following example.
IP Address: 192.168.8.1, any IP address within 192.168.8.1 to 192.168.8.253 is
good to connect the Wireless LAN Access Point.
IP Subnet Mask: 255.255.255.0
8.
Click OK to complete the IP parameter settings.
For OS of Microsoft Windows NT:
1.
Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2.
Move mouse and double-click the right button on Network icon. The Network window will
appear. Click Protocol tab from the Network window.
3.
Check the installed list of Network Protocol window. If TCP/IP is not installed, click the Add
button to install it; otherwise go to step 6.
4.
Select Protocol in the Network Component Type dialog box and click Add button.
5.
Select TCP/IP in Microsoft of Select Network Protocol dialog box then click OK button to
install the TCP/IP protocol, it may need the Microsoft Windows CD to complete the
installation. Close and go back to Network dialog box after the TCP/IP installation.
6.
Select TCP/IP and click the Properties button on the Network dialog box.
7.
Select Specify an IP address and type in values as following example.
IP Address: 192.168.8.1, any IP address within 192.168.8.1 to 192.168.8.253 is
good to connect the Wireless LAN Access Point.
IP Subnet Mask: 255.255.255.0
8.
Click OK to complete the IP parameter settings.
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
12
Advertisement
Table of Contents
