3Jtech TS8DWRWIFIROUTER User Manual page 31

http://www.3jtech.com.tw
http://www.pnpipcameras.com
DWR User's Guide
PPPoE
User Name
Password
Service Name
Connection Type
Idle Time
MTU Size
Attain DNS
Automatically
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Item
Click to select PPPoE support on WAN interface.
There are user name, password, connection type
and idle time settings need to be done.
If you select the PPPoE support on WAN interface,
fill in the user name and password to login the
PPPoE server.
If you select the PPPoE support on WAN interface,
fill in the user name and password to login the
PPPoE server.
Fill in the service name of Service Name. The
default value is empty.
Select the connection type from pull-down menu.
There are Continuous, Connect on Demand and
Manual three types to select.
Continuous connection type means to setup the
connection through PPPoE protocol whenever this
DWR is powered on.
Connect on Demand connection type means to
setup the connection through PPPoE protocol
whenever you send the data packets out through the
WAN interface; there are a watchdog implemented
to close the PPPoE connection while there are no
data sent out longer than the idle time set.
Manual connection type means to setup the
connection through the PPPoE protocol by clicking
the Connect button manually, and clicking the
Disconnect button manually.
If you select the PPPoE and Connect on Demand
connection type, fill in the idle time for
auto-disconnect function. Value can be between 1
and 1000 minutes.
Fill in the mtu size of MTU Size. The default value is
1400.
Click to select getting DNS address for PPPoE
support. Please select Set DNS Manually if the
PPPoE support is selected.
Description
31