Internet Settings; Wan - 3Jtech FWT Wifi AP_USB x 4 User Manual

http://www.3jtech.com.tw
http://www.pnpipcameras.com
FWT WIFI AP_USB x 4 User's Guide

3.1. Internet Settings

3.1.1 WAN

The WAN (Wide Area Network) section is where you configure your Internet connection type.
Besides supporting 3G dialup connection type to access Internet, there are three WAN connection
modes to choose from: Static (Fixed IP), DHCP(Auto Config) and PPPoE(ADSL). If you are unsure
of your connection method, please contact your Internet Service Provider before configuring the
required parameters. Note: If using the PPPoE option, you will need to ensure that any PPPoE
client software on your computers is removed or disabled.
Through the Wan Weight function on this WAN setting webpage, you can set up the transmission
ratio among the Ethernet WAN and each 3Gs (WAN1: WAN2: WAN3: WAN4: WAN5) for the router's
load balance. Default is 1:1:1:1:1.
Note: If the external dongle is not connected, the wan weight for it must be either 0 or empty.
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
：
：
15