Lan Interface Setup - 3Jtech TS8DWRWIFIROUTER User Manual

http://www.3jtech.com.tw
http://www.pnpipcameras.com
DWR User's Guide
SSID
BSSID
Channel
Type
Encrypt
Signal
Refresh
Connect

3.2.4.9 LAN Interface Setup

This page is used to configure the parameters for local area network that connects to the LAN ports
of your DWR. Here you may change the setting for IP address, subnet mask, DHCP, etc.
IP Address
Subnet Mask
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Item
It shows the SSID of AP.
It shows BSSID of AP.
It show the current channel of AP occupied.
It show which type AP acts.
It shows the encryption status.
It shows the power level of current AP.
Click the Refresh button to re-scan site survey on
the screen.
Click the Connect button to establish connection.
Item
Fill in the IP address of LAN interfaces of this WLAN
Access Point.
Fill in the subnet mask of LAN interfaces of this
WLAN Access Point.
Description
Fig. 3-14
Description
25