Table of Contents
Advertisement
http://www.3jtech.com.tw
http://www.pnpipcameras.com
DWR User's Guide
3.2.4.10 WAN Interface Setup
This page is used to configure the parameters for wide area network that connects to the WAN port
of your DWR. Here you may change the access method to Static IP, DHCP, PPPoE or PPTP by
clicking the item value of WAN Access Type.
Static IP
Static IP
IP Address
Subnet Mask
Default Gateway
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Item
Click to select Static IP support on WAN interface.
There are IP address, subnet mask and default
gateway settings need to be done.
If you select the Static IP support on WAN interface,
fill in the IP address for it.
If you select the Static IP support on WAN interface,
fill in the subnet mask for it.
If you select the Static IP support on WAN interface,
fill in the default gateway for WAN interface out
going data packets.
Fig. 3-15
Description
27
Advertisement
Table of Contents
