Important Information; Safety Precautions; Danger: Be Careful With Electricity - Optoma WHD200 Manual

1.

Important Information

Please take the time to read this user manual
before using the TRANSMITTER and RECEIVER.
It contains important information about
operating your Full HD video wireless kit.
Our limited warranty applies when the product
is handled properly for intended use, in
accordance with its operating instruction.
However, the warranty may be void in the
following cases:

Repair, product modification or alteration
have been performed by unauthorized
service personnel

Damages caused by accidents, including
but not limited to, lightning, water, fire,
or moisture

Use of an AC adapter not compatible with
the product and its voltage rating

The model number on the product has
been altered, deleted, removed or made
illegible.

Safety Precautions

WARNING!
RISK OF
ELECTRICAL
SHOCK
DO NOT OPEN
WARMING:
TO REDUCE THE RISK OF ELECTRICAL SHOCK
DO NOT REMOVE THE COVER
NO USER-SERVICEABLE PARTS ARE INSIDE
REFER SERVICING TO QUALIFIED
PERSONNEL

Danger: Be careful with electricity.


Power to the units must be switched off
before any work is undertaken, such as
any AV device connection or TV
connection.

Power outlet: To prevent electric shock,
make sure to use the appropriate AC
adapters as power supply to the
transmitter and the receiver.

Power cord: Be sure the power cord is
routed so that it will not be stepped on or
pinched by heavy items.

Power overloading: Avoid overloading
electrical outlets or extension cords
which otherwise could result in electric
shock or fire.

Lightning: Disconnect the product from
the power source if it is left unattended
for a long period of time, and to protect
the product from lightning.

Always disconnect the power cord from
the power outlet when you are not using
your Full HD Video wireless kit. This
reduces the risk of electric shocks or fire.
Warning

This product should not be exposed to
dripping or splashing. No object filled
with liquids, such as vases, should be
placed on the product.

Object Entry: To avoid electric shock,
never stick anything in the slots on the
case or remove the cover.

Place receiver/transmitter on a flat, hard
and stable surface

Ventilation: Do not block the ventilation
slots on the receiver/transmitter or place
any heavy object on the top cover.
Blocking the air flow could damage the
receiver. Arrange components so that air
can flow freely around the receiver.
Ensure that there is adequate ventilation
if the receiver is placed in a stand.
Put the receiver/transmitter in a property
ventilated area, away from direct sunlight
or any source of heat.
2