Step 5: Mounting The Whdi Device To The Wall - Optoma WHD200 Manual

Step 5: Mounting the WHDI DEVICE to the Wall

(1) Refer the drawing of the bottom page
that have relative position of the main
holes and attach this paper on wall.
(2) Drill pilot holes.
(3) Insert the supplied two Anchors into the
wall.
(4) Insert two screws into the anchors. Leave
1/8" length for mounting the Transmitter
or receiver.
(5) Place WHDI DEVICE main holes over the
protruding screws and slide down into
position.
18