Table of Contents
Advertisement
Item /
Status Description
Mode
Standby
For power saving mode.
Initial Boot
It will spend 15 ~ 20
up / Warm
seconds for system boot
up
up.
Continuing search
available channels If
Searching
system can't establish
available
link over 80s after
channels
initialization.
(Note A & D)
No input from selected
source
(Note B)
Wireless
linked
Video format not
Mode
recognized
(Note C)
Video format is
recognized
Note:
A.
If the RF connection over 80sec and still not established, it might link lost or the transmitter is
most likely out of range. You may have to verify the range and adjust or shorten the distance
between your HDTV set with the transmitter and the receiver. The maximum video
transmission range for 1080p content is up to 66 feet in line of sight (LOS). < The minimum
range is 6.5 feet. >
Power LED
Status LED
(on RX)
(on RX)
Static Red
off
Blinking
Blinking
Blue
Blinking
Blinking
Blue
Blinking
Static Blue
(Quickly)
Blinking
Static Blue
(Slowly)
Static Blue
Static Blue
15
OSD Display
(on RX)
4 level, looping.
Looping display
these two OSD
-
Hide quick links:
Advertisement
Table of Contents
