Supported Resolution - Optoma WHD200 Manual

5.

Supported Resolution

If the SOURCE LED continues to blink in blue (slower than "no signal" mode); OSD display:
and there is no video displayed or the video quality suffers, it indicates that the video frame rate
from your A/V source device is not supported. Ensure that the consumer timing of your HD device
is compliant with the standard listed below:
Video Format Timings
640x480p @ 59.94 / 60Hz
720x480p @ 59.94Hz
720x480p @ 60Hz
720x576p @ 50Hz
1280x720p @ 50Hz
1280x720p @ 59.94 / 60Hz
1920x1080i @ 50Hz
1920x1080i @ 59.94 / 60Hz
1920x1080p @ 50Hz
1920x1080p @ 59.94 / 60Hz
1920x1080p @ 23.98 / 24Hz
1920x1080p @ 25Hz
1920x1080p @ 29.97 / 30Hz
640x480 @ 59.94 / 72.809Hz
800x600 @ 60.317 / 72.188Hz
1024x768 @ 60 / 70.069Hz
1280x768 @ 60 Hz
1280x1024 @ 60 Hz
1600x1200 @ 60Hz
21
Resolution
Primary CEA Video Timing
480p
576p
720p
1080i
1080p / 60
Secondary CEA Video Timing
1080p / 24
VESA Timing (DVI only)
VGA
SVGA
XGA
WXGA
SXGA
UXGA
Support
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
,