Table of Contents
Advertisement
Press the SOURCE button on the RCU or on the top of transmitter (or receiver) for audio/video
source input selection.
OSD Displayed:
HDMI1
or
HDMI2
Press the IR button of RCU for change IR Blaster frequency, enable to switch IR Blaster
frequency 47K to 56K to 36K recurring. (Note : IR blaster frequency default setting is 47KHz)
Press once for current IR frequency status display. The OSD shows:
HDMI1 CH10 1280x1024
= 47KHz
Press IR key again to switch IR blaster frequency. The OSD shows:
HDMI1 CH10 1280x1024
= 56KHz
NOTE: Only the status of the RECEIVER (receiver) connected to the HDTV can be displayed on the
OSD. The status of the TRANSMITTER (transmitter) HDMI out cannot be displayed.
CH10 1280x1024
CH10 1280x1024
17
Hide quick links:
Advertisement
Table of Contents
