Emerson ROCKPOINTE CF630ORB00 Owner's Manual page 8

3. Ceiling Fan Assembly
3.10
Carefully turn the partially assembled Ceiling Fan over
and place it on the styrofoam for final preparation
(Figure 9).
Remove the five Shipping Spacers and the Spacer
Attachment Screws from the Motor before installation of
blade assemblies (Figure 9).
Discard the five shipping spacers and spacer screws.
3.11
Your ceiling fan is supplied with one set of five fan
blades.
Mount Blade Flange to Ceiling Fan Blade using three
#8-32 x 1/4" Washer Head Screws (supplied)
(Figure 10).
Repeat this procedure for the other four fan blades and
blade flanges.
(Continued)
PARTIALLY
ASSEMBLED
CEILING FAN
Figure 9
Figure 10
8
REMOVE & DISCARD
SHIPPING SPACERS &
ATTACHMENT SCREWS (5)
#8-32 x 1/4" WASHER HEAD
SCREWS (3 per blade)
CEILING FAN
BLADES (5)
BLADE
FLANGES (5)
ETL Model No.: CF630