Emerson ROCKPOINTE CF630ORB00 Owner's Manual page 15

5. How to Wire Your Ceiling Fan
5.5
After connections have been made, turn wires upward
and carefully push wires into the outlet box, with the
white and green wires on one side of the outlet box and
position the black and blue wires on the other side of
the outlet box (Figure 23).
Position the Antenna Wire on top of the Receiver.
Slide the RCFP Receiver completely onto the
hangerball, nestled in the hanger bracket (Figure 23).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
5.6
Wiring diagram of complete wiring of the Ceiling Fan
with the RCFP Receiver (supplied) (Figure 24).
ANTENNE
WIRE
TUCK ALL WIRES
INTO OUTLET BOX
Figure 23
GROUND
WIRE
GREEN
GROUND WIRE
FROM HANGER
BALL
GREEN GROUND
WIRE FROM
FAN MOTOR
HANGER
WHITE WIRE
BRACKET
SUPPLY BLACK RECEIVER
WHITE WIRE
WIRE
Figure 24
Please contact 1-800-654-3545 for further assistance
15
(Continued)
OUTLET BOX
SLIDE RECEIVER
INTO HANGER
BRACKET
ANTENNA WIRE
RECEIVER BLACK WIRE
RECEIVER RED
WIRE
RECEIVER
BLUE WIRE
FAN MOTOR
BLUE WIRE
emersonfans.com
ETL Model No.: CF630