Power Button Usage; Touch-Screen Navigation; Using The Stylus; Reset Device - Pandigital Novel User Manual

Power Button Usage

Turn On: Press and hold the power button at least 3 seconds or until the boot up
message appears.
Turn Off: Press and hold the power button for 3 seconds, and then tap
OK
and tap confirm the power off or
Sleep Mode On/Off (energy saver): While unit is on, press & release the power
button quickly.

Touch-Screen Navigation

The touch-screen allows for quick, easy and convenient navigation for all
applications. Throughout the User Guide, you are instructed to use the following
touch navigation methods:
Tap = quick touch and release your finger on an item on the screen
(i.e., type on the onscreen keyboard, select item buttons).
Touch & hold = touch your finger and hold in place until a response by
application (i.e., display dictionary, add note to book page).
To open a menu for customizing the
area on the screen until the menu appears.
Touch & drag = touch & hold an item for a moment and then, without lifting your
finger, move your finger on the screen until you reach the target position (i.e.,
reposition icons on
Finger slide = quick light touch & slide your finger across the screen, and then
release (i.e., turning pages of your book, scrolling screen up/down).
Touch, hold & slide = touch your finger, hold & slide your finger across the
screen, and then release (i.e., highlighting text, selecting text to paste).

Using the Stylus

A stylus is conveniently stored in the bottom right end of the device. When
desired, you can use it instead of your finger for easier and sometimes more
accurate screen navigation when tapping small options.

Reset Device

In the event that the device does not respond to your touch, you can reboot/restart it
by pressing and holding the power button for 10 seconds.
Cancel
Home
Home
screen).
PRELIMINARY 10
to leave the device on.
screen, touch and hold in an empty
Power off
,