Table of Contents
Advertisement
5 Operation
5.5.3 Extended functionality
In addition to the basic voltage and current measurements, the meter can be set
to different modes for extended functionality.
5.5.3.1 Selecting the mode
The mode icons applicable for the selected measurement type are displayed in
the lower part of the display. When a mode is enabled, the icon is framed.
Figure 5.2 Mode icons (AC voltage measurements): Peak mode and Silent
mode are enabled
The navigation buttons are used to select a mode icon and to enable/disable a
mode:
•
Use the
and
rently selected icon will flash.
•
Press the
5.5.3.2 Peak mode
In Peak mode, the meter captures and displays the positive and negative peak
values, and updates only when a higher/lower value is registered. Peak mode is
available when measuring AC current or voltage in Manual select mode.
1.
Use the navigation buttons to select
2.
Press the
Min.
•
In Peak Max mode, the
•
In Peak Min mode, the
3.
Press and hold the
#T559825; r.8008/8011; en-US
navigation buttons to navigate to a mode icon. The cur-
button to enable/disable the selected (flashing) mode.
button to toggle between the display of Peak Max and Peak
indicator is displayed.
indicator is displayed.
button to disable Peak mode.
and enable Peak mode.
15
Hide quick links:
Advertisement
Table of Contents
