Radio Thermostat CT102 User Manual page 50

Anti-theft
The Anti-Theft Command Class disables a subset of supported/
controlled command classes in the thermostat if the thermostat is
being disconnected from and reconnected to a Z-Wave network.
(This thermostat supports version 2 of the Anti-Theft Command
Class.) This command class is typically used when installing a
thermostat in a public location, such as a hotel room or conference
center. The command class allows the user to lock the thermostat to
the actual Z-Wave network and to render it useless if it is removed
from the local network without being unlocked. Another application
would be to protect service-provider-owned products from leaving
the service providers network before they are paid for.
Disabled Commands With Engaged Anti-Theft protection
Basic Command
Indicator Command
Multilevel Sensor Command
Thermostat Operating State
Command
Thermostat Fan State Command
Version Command
Battery Command
Anti-theft Command
Clock Command
Manufacturer Specific Command
Thermostat Mode Command
Thermostat Fan Mode Command
Thermostat Setpoint Command
Configuration Command
Association Command
Multi Channel Command
(Only supported if a humidity sensor is
present.)
CT102 Thermostat
Z Wave
®
3