Radio Thermostat CT102 User Manual page 10

Mount the CT102 to the Wall
1. Hold the CT102 against the wall, with the wires coming over the
top; above terminal block.
2. Position CT102 for best appearance, cover the hole in the wall.
3. Mark first and drill a 3/16-in.(4.8mm) hole at each screw location.
4. If you are mounting the CT102 to sheet rock or if you are using the
old mounting holes, use the plastic anchors provided.
5. Attach the CT102 to the wall with the screws provided.
10
Installation Guide CT102
Wiring