Radio Thermostat CT102 User Manual page 45

To Change Heat, Cool, & Auto Programs
1. Select the Day
program. Touch the day of the
week area to cycle through
the days to the desired day.
2. Select the Time Slot
want to program. Touch the
time slot area to cycle through
to select the desired period.
3. Set the desired start time
of that time slot. Touch the
time arrows
desired period's starting time.
Hold down time arrow for fast
time scrolling.
4. Select the desired target
temperature for that time
slot. Touch the Temperature
Adjust arrows
desired period's temperature.
Not Blinking = room at target temperature
Blinking = heating/cooling in progress
22
1 you want to
2 you
3 to select the
4 to select the
CURRENT PROGRAM'S
START TIME
AM
MORN
3
6
HOLIDAY
COPY DAY
5
Modify Programs
• Repeat Step 2 - 4 to set
remaining Time Slots.
5. Touch Copy Day
The settings for the current
day will be copied to the next
day, which will appear on the
screen. Make any necessary
adjustments.
NOTE: Hold down Copy Day
for 3 seconds to copy to all 7
days.
6. Touch the Day field until
Holiday
steps 2-4 to define how the
program should run when the
Holiday setting is enabled.
7. Touch
Menu screen.
PROGRAMMED
TARGET
TIME SLOT
TEMPERATURE
2
F
Tu
1
CURRENT MODE
Customization
5 once.
6 is displayed. Follow
to return to the
4
COOL
AUTO
TRUE
PROGRAM