Radio Thermostat CT102 User Manual page 39

Menu Screen Functions
Access MENU screen (see
Time
Swing
Filter
RADIO RADIO
Differential
1 1
Mate
MATE MATE
Calibrate
Set Time Of Day, Set Fº or Cº
page
Sound see
Swing (HVAC Cycling Rate)
This feature enables you to set the acceptable variance in
temperature between the CT102's setting and the current room
temperature before the heating or cooling system will turn on. The
Swing range can be from 0.5 to 4.0F (.25 to 2C). For example, if Swing
is set to 2.0°F and the CT102 is set to 70°F target temperature, the
heat cycle will start when the room temperature drops to 68°F.
Similarly, the cooling system will start when the room temperature
increases to 72°F. The HVAC runs until the room reaches the target
temperature, and then shuts off.
To set Swing
1. From the Menu screen, touch Swing.
2. Touch Time Adjustment arrows to set the SWING from 0.5°
to 2.0°F. The HVAC will run more frequently at .5°F and less
frequently at 2°F. The default is 1°F.
3. Touch
Filter
To help you remember to replace your air filters, use the filter
replacement reminder count-down (in days). Setting this value to 0
disables the reminder.
16
* These icons are not visible when the thermostat is connected to a Z-Wave network.
PM PM
FILTER FILTER SWING SWING
DIFF
CALIBRA CALIBRATE TE
#
to return to the Menu screen.
page 9)
F F
RECOVERY ECON
ON
Recovery
Econ Or Fast
Customization
Menu Screen
HVAC
HVAC Setup*
SETUP
PROGRAM
Program*
Lock
˚F ˚C Set
Sound