Radio Thermostat CT102 User Manual page 49

Z-Wave Reference
®
The CT102 can work in the same network with any other certified
Z-Wave device, regardless of manufacturer/vendor. See your specific
Z-Wave® controller's User Manual for detailed instructions on
operating your thermostat through the network.
Behavior Note: When power is first applied to this device
it will broadcast a Hail message followed by a Node
Information frame. This behavior is to maintain backwards
compatibility with older controllers that work with this line
of devices.
Advanced Z-Wave
The CT102 supports compliant mapping of the Z-Wave
COMMAND_CLASS to the CT thermostat "Energy Saving" and
"Comfort Mode" as follows:
• Basic Set (Value = 0x00) = Set Energy Saving Mode
• Basic Set (Value = 0x01-0x63 & 0xFF) = Set Comfort Mode
Energy Savings applies a 4° F setback to the existing set point
temperature to comply with EPA recommendations for energy
savings.
2
Information
®
CT102 Thermostat
Z Wave
BASIC_
®
®