Changing Pilot Assist Speed - Volvo XC 90 Owner's Manual

DRIVER SUPPORT
||
•
the lane is at the top of a hill, on an
uneven road surface or over a bump.
•
bad weather conditions (rain, snow, fog,
slush, poor visibility, backlighting, etc).
The driver should also be aware that Pilot
Assist has the following limitations:
•
High curbs, barriers and temporary obsta-
cles (cones, barriers etc) may not be
detected or could be detected incorrectly
as side marker lines, which may create a
risk of collision. The driver must ensure a
safe distance to these obstacles.
•
The camera or radar sensor may not be
able to detect objects if there are pot-
holes or if there are stationary objects
partially or completely blocking the road.
•
Pilot Assist does not "see" pedestrians,
animals, etc.
•
Pilot Assist's steering capacity is limited
and may not always be able to help the
driver keep the vehicle in the lane.
Hands on the steering wheel
Pilot Assist only functions when the driver's
hands are on the steering wheel, which is con-
tinuously monitored by the system. If this is not
the case, the driver will be alerted by a text mes-
sage in the instrument panel. If the driver's hands
are not returned to the steering wheel, an audible
signal will sound.
300
If the driver does not return his/her hands to the
steering wheel after the audible signal, Pilot
Assist will go into standby mode and must be
reactivated by pressing .
Related information
•
Pilot Assist* (p. 295)
•
Changing Pilot Assist speed (p. 300)
•
Setting a Pilot Assist time interval (p. 301)
•
Changing target vehicles and automatic
braking with Pilot Assist (p. 305)
•
Deactivating/resuming Pilot Assist (p. 303)
•
Passing Assistance with Adaptive Cruise
Control (ACC)* or Pilot Assist* (p. 288)
•
Pilot Assist limitations (p. 306)
•
Pilot Assist symbols and messages (p. 308)

Changing Pilot Assist speed

Different speeds can be set for Pilot Assist.
Function buttons and symbols
–
Change a set speed by pressing the
or (3) buttons briefly or by pressing and
holding them:
•
Press briefly: changes speed in
+/– 5 mph (+/– 5 km/h) increments.
Each press changes the vehicle's speed
by +/– 5 mph (+/– 5 km/h).
•
Press and hold: release the button when
the set speed indicator (4) has moved to
the desired speed.
•
The most recently set speed will be stored in
the function's memory.
If speed is increased by pressing the accelerator
pedal before the button is pressed, the vehi-
(1)
* Option/accessory.