Android Auto - Volvo XC 90 Owner's Manual

Twin engine
Hide thumbs Also See for XC 90:
Table of Contents

Advertisement

INFOTAINMENT

Android auto*

Android Auto makes it possible to get voice
guidance from the navigation system, listen to
music, make calls and to use apps from an
Android device, all through a interface integrated
into the center display. Android Auto can also be
controlled using the buttons on the right-side
steering wheel keypad or by giving voice com-
mands while focusing on driving. Android Auto
is started from the center display's App view.
After Android Auto has been started once, it will
then start automatically the next time the device
is connected. The automatic start feature can be
deactivated in Settings. Android Auto functions
with selected Android devices.
Information about the apps that are supported
and the cell phones that are compatible can be
found at: www.android.com/auto/. In the case of
third-party apps, see Google Play.
464
NOTE
Please be aware that Volvo has no con-
trol over the content of the Android Auto
app.
If a cell phone is connected to
Android Auto, another Bluetooth-enabled
device can be used to stream media.
Bluetooth is active while Android Auto is
being used.
If navigation guidance is being provided by
Android Auto, this will only be shown on the cen-
ter display (not on the head-up display* or the
instrument panel).
The Android Auto apps can be controlled from
the center display, the right-side steering wheel
keypad or voice-controlled. Press and hold the
button to activate voice control. Press briefly
to deactivate.
By using Android Auto, you acknowledge
the following: Android Auto is a service
provided by Google Inc. under its terms and
conditions. Volvo Cars is not responsible for
Android Auto or its features or applications.
When you use Android Auto, your car
transfers certain information (including its
location) to your connected Android phone.
You are fully responsible for your and any
other person's use of Android Auto.
Starting Android Auto
Connecting an Android device for the first
time
1. Connect the Android device to the USB
socket in the tunnel console. If there are two
USB sockets, connect to the one with the
white frame.
2. Read the information in the pop-up window
OK
that appears and tap
.
Android Auto
3. Tap
in the center display's
App view.
4. Read the conditions and tap
nect.
> The Android Auto sub-view will open and
compatible apps will be displayed.
5. Tap the desired app.
> The app will start.
Accept
to con-
* Option/accessory.

Advertisement

Table of Contents
loading

Table of Contents