Changing A Wheel – Removing Wheel - Volvo V60 Owner's Manual

Changing a wheel – removing wheel
Wheel changes should always be carried out
correctly.
The jack*, towing eyelet and tools* are stowed
under the floor of the cargo area.
Changing a wheel
1. Apply the parking brake and put the gear
selector in P.
2. Take out the jack*, lug wrench*, the tool for
removing the plastic covers on the wheel
nuts, the towing eyelet and the wheel cover
removal tool (certain models only) stowed
under the floor of the cargo area.
3.
Tool for removing the plastic covers on the wheel nuts
Remove the wheel cover (where applicable)
using the removal tool or remove the wheel
cover by hand.
4. Block the wheels that are on the ground with
wooden blocks or large stones.
PRACTICAL INFORMATION
Lug wrench and towing eyelet
5. Screw the towing eyelet into the lug wrench
as shown in the illustration.
CAUTION
The towing eyelet must be screwed into the
lug wrench as far as possible.
}}
79
* Option/accessory.