Volvo XC 90 Owner's Manual page 234

LOADING AND STORAGE
||
5. Attach the mounting bracket's hook through
the cargo anchoring eyelet near the floor of
the cargo compartment and insert the threa-
ded section of the bracket through the grid's
lower attachment hole (1).
6. Slide the plastic sleeve onto the threaded
section of the of the mounting bracket with
the sleeve's flange turned upward and press
it down through the hole. Screw the screw
cover into place until its underside is approx.
0.2 in. (5 mm) from the grid (2).
7. Repeat steps 5 and 6 for the opposite side.
8. Center the grid and tighten both mounting
brackets alternately until the grid is held
securely in place.
Removing
Remove the steel grid by performing the steps
above in reverse order.
The hooks can be removed before the plastic
sleeves are removed from the holes in the grid.
232
Related information
•
Cargo net (p. 229)
•
Cargo compartment cover* (p. 227)
•
Load anchoring eyelets (p. 226)
•
Loading (p. 224)
* Option/accessory.