Volvo XC 90 Owner's Manual page 165

Storing the position*
The mirror positions are stored in the key mem-
ory* when the vehicle has been locked with the
remote key. When the vehicle is unlocked with
the same remote key, the mirrors and the driver's
seat adopt the stored positions when the driver's
door is opened. The mirrors' position can also be
stored in the power seat's* memory.
Tilting the door mirrors when parking
The door mirrors can be tilted down to help give
the driver a better view along the sides of the
vehicle, for example when parallel parking.
–
To activate this function, select reverse gear
and press the L or R mirror control button to
tilt the mirror down.
The door mirror will reset to its normal position:
•
after 10 seconds when reverse is disen-
gaged
•
immediately if you press the corresponding L
or R button again.
NOTE
Only one mirror can be tilted down at a time.
Only on models equipped with a power driver's seat.
8
Automatically tilting the door mirrors
8
when parking
This function can be activated/deactivated in the
center display.
Settings
1. Tap in Top view.
2. Tap
My Car Mirrors and Easy
Exterior Mirror Tilt at Reverse
3. Under
Off Driver Passenger
8
select , ,
activate/deactivate and select which mirror
to tilt.
Folding mirrors*
When parking in a limited space, the mirrors can
be folded in:
1. Press the L and R buttons at the same time
(the ignition must be in at least mode I).
2. Release the buttons after approx. 1 second.
The mirrors will stop automatically when they
are completely folded in.
Fold out the mirrors by pressing the L and R at
the same time. The mirrors will stop automatically
when they return to their original positions.
Automatic folding when the vehicle is
8
locked
The mirrors can be folded in/out automatically
when the vehicle is locked/unlocked.
This function can be activated/deactivated in the
center display.
Settings
1. Tap
2. Tap
My Car
Fold Mirror When Locked
3. Select
Entry.
vate/deactivate.
,
Resetting the mirrors' position
Both
or to
A mirror that has been moved manually (e.g.,
bumped into in a parking lot, etc.) has to be
returned to its normal position electrically before
automatic folding will function correctly.
1. Fold in the mirrors with the L and R buttons.
2. Fold out the mirrors with the L and R buttons.
The mirrors have now been reset to their original
positions.
Auto-dim*
Settings can be made for the auto-dim function
in the rearview and door mirrors.
The auto-dim function is always active while the
vehicle is being driven except when the reverse
gear has been selected. The level of sensitivity
for this function can be set to three levels, which
affect the rearview mirror and door mirrors.
INSTRUMENTS AND CONTROLS
in Top view.
Mirrors and Easy Entry.
to acti-
* Option/accessory.
}}
163