Displaying Trip Statistics - Volvo XC 90 Owner's Manual

INSTRUMENTS AND CONTROLS
||
Resetting a trip odometer
Reset trip odometer TM by pressing and holding
the RESET button the left-side steering wheel
lever. Trip odometer TA resets automatically if the
ignition is switched off for more than 4 hours.
Changing the unit of measure
Change the units of measure for driven distance
and fuel consumption in the center display's Top
Settings
view by selecting
of Measurement
and marking the desired unit.
NOTE
Changing these units of measure will also
change the ones used in the Volvo navigation
system*.
This can also be displayed in kilometers.
14
176
Related information
•
Displaying trip statistics (p. 176)
•
Trip computer (p. 174)
System Units

Displaying trip statistics

Trip computer statistics can be displayed graphi-
cally in the center display.
Driver performance
Open the
app in the app menu to display
trip statistics.
Each bar in the graph repre-
sents a driving distance of
1 mile, 10 miles or 100 miles
depending on the current scale; bars are added
from the right and the bar at the far right shows
the value for the current trip.
Average fuel consumption is calculated from the
most recent time at which the current trip odom-
eter was reset.
Fuel and electrical current consumption are
shown in separate graphs. The electrical current
graph shows "net" consumption, i.e., consumed
current minus regenerated current generated by
braking.
Trip statistic settings
Preferences
Select to:
•
change the graph's scale
•
Reset data after each trip (this occurs if the
vehicle remains parked for more than 4
hours)
•
Reset data for the current trip
14
* Option/accessory.