DRIVER SUPPORT
||
that the driver's hands are not on the steering
wheel, the driver will be instructed to actively
steer the vehicle by a text message and an audi-
ble signal.
If Pilot Assist still cannot detect the driver's
hands on the steering wheel, the function will go
into standby mode. Pilot Assist must then be
reactivated by pressing the
steering wheel.
NOTE
Note that the Pilot Assist function only works
when the driver's hands are on the steering
wheel.
Related information
•
Pilot Assist (p. 279)
284
Managing Pilot Assist speed
Pilot Assist can be set to various speeds.
Setting/changing set speed
button on the
Note: This illustration is general and details may vary
depending on model and market.
: Increases the set speed
: Reduces the set speed
Set speed
–
Change a set speed by pressing the
or
(2) buttons briefly or by pressing and
holding them:
•
Press briefly: Press briefly: each press
changes the speed in +/- 5 mph
(+/- 5 km/h) increments.
•
Press and hold: Release the button when
the set speed indicator (3) has moved to
the desired speed.
•
The most recently set speed will be stored.
If speed is increased by depressing the accelera-
tor pedal while pressing the
steering wheel, the vehicle's speed when the but-
ton is pressed will be stored as the set speed.
Temporarily increasing speed using the accelera-
tor pedal, e.g. when passing another vehicle, will
not affect the setting. The vehicle will return to
the set speed when the accelerator pedal is
released.
(1)
button on the
Need help?
Do you have a question about the XC40 and is the answer not in the manual?