Chapter 4 Monitoring Via The Console; Wwan Monitoring - Teldat 4Ge User Manual

Teldat S.A.

Chapter 4 Monitoring via the console

To access the monitoring console of the Teldat 4Ge, you must use a telnet session through the IP address that it
has been assigned using DHCP. To access using telnet, the default user is monitor and the password is teldat.
Once we have accessed the monitoring console, the following commands are available:
4Ge login...
User: monitor
Password: ******
Teldat S.A.
Router model 4Ge 35 1 CPU QorIQ P101X
1 LAN, 1 WWAN Line
CIT software version: 11.00.02 Oct 11 2013 17:06:18
4Ge *?
logout
monitor
restart
4Ge *
By using the monitor command, we can access the monitoring menu. Here we can check the status of the inter-
faces, statistics, connection data, etc.
4Ge *monitor
Console Operator
4Ge +?
buffer
clear
configuration
device
error
event
log
memory
network
protocol
queue
statistics
system
4Ge +
To obtain further information on how to monitor the different interfaces and protocols that the device has, we recom-
mend you check the following manuals: Teldat-Dm781 "Cellular Interface" , Teldat-Dm730 "DHCP Protocol" and
Teldat-Dm750 "Ethernet Subinterface" .

4.1 WWAN Monitoring

By accessing the monitoring menu of the cellular1/0 interface, we can obtain information about the 4G module.
4Ge +network cellular1/0
-- AT Console --
4Ge cellular1/0 AT+?
at-mode
buffer
command
list
module
network
power-module
reset
exit
4Ge cellular1/0 AT+
We can list this data using the list command.
Teldat 4Ge
(c)2001-2010
S/N: 809/00133
Ends the Telnet connection established with the device
Monitor the state of the system
Restart the device
Packet buffers assigned to each interface
Clear network statistics
List status of current protocols and interfaces
List statistics for the specified interface
List error counters
Event Logging System environment
Dump log data
Display memory, buffer and packet data
Enter the console environment of a specified network
Enter the commands environment for a specified protocol
Display buffer statistics for a specified interface
Display statistics for a specified interface
Permit monitoring of the system's memory and stacks
Send AT commands directly to the module
Display saved commands and answers
Send AT command to the module
List interface and module parameters
Module related commands
3G Network related commands
Module power control
Send reset command
4 Monitoring via the console
13