Aaeon OMNI-5215-SKU User Manual page 79

2. Follow the instructions
3. Drivers will be installed automatically
Step 5 – Install USB 3.0 Drivers
1. Open the STEP5 - USB3.0 folder and select your OS
2. Open the .exe file in the folder
3. Follow the instructions
4. Drivers will be installed automatically
Step 6 – Install ME Drivers (Optional, Windows 8.1/ 10 only)
1. Open the STEP6 – ME folder followed by SetupME.exe
2. Follow the instructions
3. Drivers will be installed automatically
Step 7 – Install PenMount Touch 6000 Series Driver (Resistive touchscreen only)
1. Open the STEP7 –PenMount Touch 6000 folder followed by Setup.exe
2. Follow the instructions
3. Drivers will be installed automatically
* The OMNI-SKU Series uses either 5-wire resistive or projected capacitive
multi-touch technologies. The latter is capable of 10 fingers multi-touch with
Windows 7 & Windows 8.x.
Step 8 – Serial Port Drivers (Optional)
For Windows 7:
1. Change User Account Control settings to Never notify
Chapter 4 – Driver Installation & Touchscreen Settings 66