Intended Use; Obligations Of The Studio Operator; Guidelines; Export - ergoline Advantage 400 Turbo Power Operating Instructions Manual

Information for the studio operator

Intended use

The tanning device is intended exclusively for cosmetic tanning of the hu-
man skin.
• The device is meant for commercial use only, not for home use.
• This device is used for tanning one adult person at a time.
• The user wears suitable eye protection that blocks UV radiation dur-
ing tanning.
Any other use shall be considered improper. The manufacturer cannot be
held liable for damage or injuries resulting from this. The operator bears
the sole risk for this.
The proper use also includes compliance with the manufacturer's instruc-
tions, operating and maintenance conditions. This device may only be
operated, maintained and repaired by persons familiar with these tasks
and who have been informed of the dangers involved.

Obligations of the studio operator

• As the operator you are responsible for informing users on possible
risks during tanning.
• All danger and safety labels attached to the device must be observed!
Do not remove them!
• No safety equipment (e.g. panel switch) may be removed or deacti-
vated which can impair the safe operation of the device!
• The device may only be operated in a serviceable condition!
• The operator is bound to ensure that the equipment is handled cor-
rectly.

Guidelines

This device was built conforming to UL STD 482, and is certified to CAN/
CSA STD C22.2 2 No. 224.

Export

We would like to point out that these devices are exclusively intended for
use in the USA and Canada and may not be exported to other countries
and operated there! The manufacturer assumes no liability whatsoever
in the event of non-compliance! We explicitly emphasize that high liability
risks may occur for the exporter and/or the operator in the event of non-
compliance.
15