Previous Channel Recall; Tv & Radio Mode; Channel Information; Volume & Audio Control - Triax ST-HD527 CI Manual

Digital combo receiver

Hide thumbs Also See for ST-HD527 CI:

Table of Contents

6.3 Previous Channel Recall

Press the "BACK" button on the RCU to toggle between the current and previously watched

channel.

6.4 TV & Radio Mode

Press the "TV/RADIO" button on the RCU to toggle between TV and Radio modes.

Every time you change channels, you will receive program information for a few seconds.

While watching the channel you can see the current channel information at anytime by

pressing the INFO, ("i"), button on the RCU.

6.6 Volume & Audio Control

6.6.1. Volume Control

To increase or decrease volume:

Use the VOL+, VOL- buttons on the front panel

Use the VOL+, VOL- buttons on the RCU

" " buttons on the RCU.

Use the

6 . 6 . 2 M u t e

To mute the sound, press the MUTE button on the RCU. To bring back the normal sound, press

the MUTE button again.

6.6.3. Audio Control

Press the L/R button on the RCU to select one of three possible Audio settings (Left, Right

and Stereo)

The current audio setting will be displayed in the channel information

6.6.4 Language Selection

Press the AUDIO key on the RCU repeatedly to select audio-language. This is dependent on the

transmission of the audio signal.

Table of Contents